Hi Stan
Yes, I have thought about getting different springs, but I was already thinking about going to 1.65's anyhow to give me more lift since I believe the additional lift may give me a little more performance based on the head flow. If I can use the springs I have and get the correct spring pressure then I would use them. On the other hand I am not going to cheap out if the pressures on the seat and open are not ideal for my cam.
I @. 6 = 320.4
I @ .7 = 333.9
E @ .6 = 243.8
E @ .7 = 248.4
__________________
Tim Corcoran
|