View Single Post
  #22  
Old 04-20-2024, 09:29 AM
Cliff R's Avatar
Cliff R Cliff R is offline
Ultimate Warrior
 
Join Date: Nov 2000
Location: Mount Vernon, Ohio 43050
Posts: 18,046
Default

A common denominator with factory bug-zapping HEI's, modules, etc is leaving the key on while you are working on the vehicle. That's a death sentence for them.
0,000
As for Pertronix, nothing but problems with them and they aren't any better if as good as the points you took out. Points as mentioned are dead solid reliable for tens of thousands of miles provided you have purchased good ones and running the correct amount of voltage thru them.

The "periodical adjustment" thing is often regurgitated when this topic comes up. You may need to take a look at 20,000 miles but should go at least 30,000 miles before you need to get in there and make any adjustment or just replace them.

Considering the way most of these cars are driven that's about 40-50 years worth of service so you can spend what time you have left worrying about other things.......

__________________
If you can read this, thank a teacher. If you can read this in English, thank a Veteran!
https://cliffshighperformance.com/
73 Ventura, SOLD 455, 3740lbs, 11.30's at 120mph, 1977 Pontiac Q-jet, HO intake, HEI, 10" converter, 3.42 gears, DOT's, 7.20's at 96mph and still WAY under the roll bar rule. Best ET to date 7.18 at 97MPH (1/8th mile),
The Following 4 Users Say Thank You to Cliff R For This Useful Post: