[cleveweld]

1961-63 Tempest Kent-Moore Automatic Transmission Bushing Installer Tools
These appear to be lightly used and are in excellent condition. These are shown in my 62 shop manual pgs 7A-40 & 41 and 4-30 & 31.

J-8360-3 Low sun gear bushing installer
J-8360-4 Rear pump body bushing installer
J-8884 Front pump body bushing installer
J-8886-1 Front turbine shaft bushing installer
J-8886-2 Rear turbine shaft bushing installer
J-8887 Bushing installer (Pinion shaft)
J-8888 Drive pinion rear bushing installer
J-9211 Clutch drum bushing installer
J-9229 Converter bushing installer

$55 for the set plus shipping


1961-63 Tempest Kent-Moore Differential Tools Shown on pgs 4-30 & 4-31 of 62 shop manual. These appear to be NOS with no signs of wear or use.

J-8362 Pinion turning adapter (for setting pinion bearing pre-load)
J-8897 Pinion bearing adjusting nut outer race remover
J-8901 Differential side bearing installer
J-8902 Side bearing adjusting nut wrench
J-8903 Side bearing pre-load & backlash checking fixture
J-8980 Speedometer gear installer

$75 for the 6 differential tools plus shipping


1961-62 Tempest Shown on 62 Tempest shop manual pg 3-24.

J-8347 Rear control arm bushing remover & installer $29 plus shipping