Gotta brag on the Oregon Grease Gadget
It works quick and easy.
The tapered cone nozzle seals off on the holes in the bar and no grease tries to push back out around the hole on the side you are greasing.
Its a real injector
Took 2 pump-injections on each side of the new/un-used 14" EGO to get some excess.
Only 1 on each side of the new/un-used 12" Craftsman (smaller nose).
I took the bars/chains off the saws so could see the action easier.
Everybody needs one of these gadgets for $6.50
My old electric Remington 8" Pole Saw is the only saw that doesn't have a sprocket/rivet in the nose. And no grease hole.
Old Ryobi 18volt 10" has a Homelite bar with sprocket/rivet/grease hole.
The 14" bar/chain from the EGO - also fits the 12" Craftsman saw.
It spins it good, and looks more like a real chainsaw with 14" bar on it.
Will grease the others tomorrow and see if the Kobalt 18" bar fits the EGO saw.
|