[Held for Ransom]

Step 4 - Remove radio knobs (not pictured) if one is there, a 5/8" socket removes shaft nuts. A 3/8” socket removes bolt from bracket (not pictured). Remove radio, unplugging wires and antenna cable. You may have to remove the whole bracket connected to heater controls, but a phillips head screw under dash has to be removed, upper bolt is a 5/16” socket. Remove the four 3/8" nuts from the backside of the heater control that holds it to the backside of dash. Move unit off of studs, you don't have to undo any of the lines.