Update-the past two weekends bled the crap out of it since it I unhooked lines at MC. I could pump it up. Right front I could barely spin by hand left intermittently the same. I could pump it now and get 1000psi but then get crappy pedal. Pumped up then using line lok on front it kept a good pedal so seemed like that localized it to front. Plugged lines at the calipers.First one better, second one almost normal. Even releasing pressure did not free up the calipers on the rotor. So they are not releasing. I even had to use a pry bar to slide the right off the rotor and the left was easier but would not pull off easily. Pulling the pads off the outer pistons are 0.080 more out of the caliper on the right than the inner,and 0.060 on the left. Thinking we got some sticking pistons.
__________________
Skip Fix
1978 Trans Am original owner 10.99 @ 124 pump gas 455 E heads, NO Bird ever!
1981 Black SE Trans Am stockish 6X 400ci, turbo 301 on a stand
1965 GTO 4 barrel 3 speed project
2004 GTO Pulse Red stock motor computer tune 13.43@103.4
1964 Impala SS 409/470ci 600 HP stroker project
1979 Camaro IAII Edelbrock head 500" 695 HP 10.33@132 3595lbs
|