Thanks Mick, this is the first time setting up my own heads so I am learning a lot. My only concern is cutting into the heads that deep as these heads were pretty much max ported and I fear ruining them. My highest spring perch is currently at 1.817 and my lowest is at 1.868. I would need to cut .043 from the highest perch and I have now way to know if I have enough material to do that. Is there a way to measure how much material I have to work with or are you saying cutting .043 is perfectly safe. Then if I did that I would need to find another spring.
__________________
Tim Corcoran
|