Well, I started taking the cover off the drivers side seat back, and the inboard side if the frame fell right out. That’s both sides that need rewelding. In holding the cover, it fells thick and heavy. I hope the new ones are somewhere near the same quality. The stitching, the piping, the material, all substantial.
It looks like the springs are not good. They got twisted out of shape after years of use with the broken frame. I saw a Chevelle site that sells a repro bench seatback assembled spring. Might have to check that out.
I was looking for a vendor for those pins. No luck yet.
I found a product ID inside the cover. The last digit (6) is mostly missing. 23507T216. Pontiac Tempest Custom (07 Sport Coupe, but fits all 2 doors) Tempest Metallic Red.
|