I have 0.030" over 455 with a stock non-N crank and a set of worked cast rods... ARP bolts, shot peened, beams ground, and set up for full floating pins. no bushing on the small end. and a set of Ross pistons. This short block went 6.02 @ 120MPH to the 1/8th at about 2900 lbs. race weight. This short block saw over 20 psi with a 0.484" lift 230 at 0.050" duration cam and out of the box round port Edelbrocks. It is still running in a different car with D port heads and a S400 turbo now, but hasn't been run much.
|