View Single Post
  #2  
Old 08-10-2019, 12:04 PM
Dick Boneske's Avatar
Dick Boneske Dick Boneske is offline
Ultimate Warrior
 
Join Date: Mar 2004
Location: Winneconne, Wisconsin
Posts: 5,387
Default

This is '65 only.

Insert them from the bottom and use a large center punch to swage the top of the tubing so it's locked in place. I use a piece of wood to hold the tubes in place from inside the heat passage while swaging.

I've had many '65 intakes where people have brazed or welded the tubes in place or welded the holes in the manifold shut and made a mess of the intake, I've never had one, though, that couldn't be fixed by carefully drilling and installing the tubes as described above. .

__________________
BONESTOCK GOATS

'64 GTO Tripower Hardtop (Wife's Car)
'64 GTO Tripower Post Coupe (My Car)
'99 Bonneville SE Sedan