I use the Chinese take off of the PPS system….50 liners 50 lids / with built in strainer..for 75.00. If I need to add more paint …I take the lid off and add more product ,put cover back on and go. Iam a cheap Bastid…when it comes to cups. For a starting point….Back the fluid screw out until you have a full trigger….then I give it one full turn in. Same with the fan….not full fan …but a tad less. A 1.4 tip is going to put a lot of material out….so be careful. I run a 1.3 tip on a Sata 5000 RP @ 30 psi
|