Thread: Pinion angle
View Single Post
  #30  
Old 05-22-2020, 02:50 PM
charlie66's Avatar
charlie66 charlie66 is offline
Ultimate Warrior
 
Join Date: Dec 2004
Posts: 3,261
Default

Quote:
Originally Posted by AG View Post
The trans and rear yoke are all that's used in the measurement, not the driveshaft. Trans is -3.15, yoke is -0.55, pinion angle is -3.70. Shoot for a between +1-2 degrees (up) on the yoke and you should be good. If it's an A-body then adjust your upper control arms for the correct yoke angle.
You know whats happening is,for some reason im having a problem with getting the passenger side bolt back in on the ear the more i lengthen it . So far its out 4 turns more then i had it. Seems like for every full turn its worth a half of a degree. Also now that i shimed up the tail a 1/2" the pan is hitting the damn center link . It used to rub just a touch but now its rubbing .. One thing effects the other type thing now.. haha..

__________________
My Half AN Injun.....