Got the belt today and it measures exactly 15/32 using my machinists rule.
With that said, it actually rides about 1/8" high in the water pump pulley groove but looks good on the crank and ps pump pulleys. Further research required. My water pump and timing cover was changed at some point to an 11 bolt unit so who knows that the pulley came from.
I'll pull it off soon to check the part number. The good thing is that everything is quiet again. I dunno, it may wear down into the groove with some run time. I ran it for about 5 minutes tops.
__________________
Greg Reid
Palmetto, Georgia
|