The squeegee Phoenix sends is pretty stiff plastic. I sprayed both stripe back side and vehicle with the water/ soap solution, laid down stripe and started in the middle. Took squeegee and worked the solution out the edges. Can't see if there is any bubbles left until you pull off outer layer 3 hours later which is now too late. Going to a professional today and ask if they can do any better. It doesn't look horrible but I'd like it to lay perfectly flat and smooth.
I did use a needle and a hair dryer which can get rid of alot of it but not the smaller ones.
__________________
72 lemans,455 e-head, UD 255/263 solid flat,3.73 gears,,,10" 4400 converter,, 6.68 at 101.8 mph,,1.44 60 ft.2007
(cam 271/278 roller)9"CC.4.11gear 6.41 at 106.32 mph 1.42 60 ft.(2009) SOLD,SOLD
1970 GTO 455 4 speed #matching,, 3.31 posi.Stock manifolds. # 64 heads.A factory mint tuquoise ,69' judge stripe car. 8.64 @ 87.3 mph on slippery street tires.Bad 2.25 60ft.Owned since 86'
Last edited by scott70; 10-18-2021 at 09:35 AM.
|