Quote:
Originally Posted by Mwieczorek
Hi, if you don't mind my asking, what wheels are you running and what backspacing?
I'm trying to figure out what to do with my '66 Bonneville. The 14" wheels are pretty rusty and the tires on them are dry rotted. Might as well do wheels and tires all at once, but I'm not finding any decent looking 15x6 wheels that aren't ridiculously expensive. I measured the backspacing of the stock wheels and came up with 4 5/16"... Not much out there with a 5x5 pattern and that much backspacing that I can see.
Thanks!
|
I will post here, instead of your thread, concerning your future wheel selection. Your car has a 5X5 bolt circle. Same as 1/2 ton Chevrolet/GMC pickups, AND full size GM cars, from 1971- 1976. Look for these wheels, they will all be 15 inch wheels.. I am not sure about what width's you can use, though. 6 inches wide would work fine, I'd think...
__________________
1977 Black Trans Am 180 HP Auto, essentially base model T/A.
I'm the original owner, purchased May 7, 1977.
Shut it off
Shut it off
Buddy, I just shut your Prius down...