Need to find one of these 20mm to 10mm washer/bushings like this Diablo blade comes with. That you posted before.
https://www.homedepot.com/p/DIABLO-5...8WMX/308879098
Quote:
3 additional bushings that allow your blade to also fit on 1/2 in., 5/8 in. or 10 mm arbor saws.
... Ryobi (10 mm arbor), porter cable (10 mm arbor) and Craftsman (10 mm arbor)
|
Actually a 20mm x 12mm would be even better - but thats probably way too oddball.
Could make either one work
Will need extra shim washers in either direction it goes.
The Blade in the old McCulloch kit is Steel 8" 8 teeth / 1.8mm thick / 20mm arbor hole.
It is quite a bit heavier than the new 10" Kurt Blades.
Would like to be able to test drive it at some point to test the weight.
Interesting that the extra shouldered hold down nut in the bag is 8mm - not 10mm
The cover plate/cupped washer deal is for 20mm and won't absorb 1" arbor.