Everybody has an issue, slow is Marks, typical engineer lol... You could of ordered the arms from SPC and the tall ball joints from Howe and put them together yourself..
If you order a box with this set up, order it through Lee yourself.. I used the three ear 800 Series box, 14:1 ratio with a 30 lb valve. I like a lot of road feel with a fast snap back from center..
I have the Stage III on my 69 el Camino and its pretty decent.. It's not a DSE but its pretty good... Get used to tightening those arms up every so often if you use your car a lot.. I still might go back to factory rubber control arms but use 1973-77 A body uppers with tall .9 ball joints to get the caster in the 5 degree range...
|