Restriction
Quote:
Originally Posted by Formulabruce
One on the core support comes up next to canister and ends, goes rubber to canister vent. This metal line goes under core support where is has Factory restrictions in it as shown by hash marks in the assy manual . this line goes to rubber over the DS inner fender, in holders, and down to metal again against firewall down low behind brake master. The metal is fastened just below by a yellow clip right at front bottom of firewall. A double clip for the rear brake line and this vent line
|
Any description of that restrictor? I have a repo line but no restriction in it.
__________________
-- Kevin
1971 Trans Am, White/Blue
455 YC Block with Edelbrock Performer RPM Aluminum Heads, 10-10.5 estimated CR, E-Performer Plus cam (soon to be 041 + Rhoads), Comp Cams 1.65:1 roller tip rockers, E-Performer Aluminum Intake (soon to be topped by a FiTech EFI), TRW forged pistons, Hedman Husler Headers, 3" dual exhaust with Flow Master mufflers.
|