Quote:
Originally Posted by TacoTownCharlie
Thanks 78W72. The new water pump instructions suggested Permatex #22017 so I'll pick that up. I'll remember to re-check the bolts as you suggest. I have my rubber mallet ready to go, I just need to get a feel for what amount of force it takes to bring the plate closer. Right now it is between .075 and .100 (with the gasket in place) so I don't have far to go. I'll try to post some old pump vs new pump pictures.
I've picked up a spray can of Chrysler Green (Duplicolor DE1619); I want to see if it will blend in with the rest of the engine. The engine was recently rebuilt so I'll keep my fingers crossed that I picked the same color as the rebuilder.
Thanks for your help.
TacoTownCharlie
|
Permatex 22071 Water Pump and Thermostat RTV silicone gasket maker is a non-corrosive formula specifically developed for water pumps and thermostat housings. It contains the highest water-glycol-resistance available in an RTV silicone.