View Single Post
  #6  
Old 05-22-2020, 08:15 PM
djustice's Avatar
djustice djustice is offline
Senior Member
 
Join Date: Jan 2014
Location: Norway
Posts: 238
Default

Just installed the Bilstein B6 front and back, a good improvment in handling and comfort, so far, only driven about 10 minutes, as i discoverd that my front shocks is not seated in the upper A-arms... Never checked this as i assumed they where installed correctly,. Orderd new proforged upper baljoints as i will be using a pickle fork to dislodge the upper ball joint from the spindle and re-seat he spring. plus there is a rip in the grease boot on the upper ball joints. Tried a prybar and a hammer on the spindle, no chance. one upgrade leads to another fix, but it's all for the better in the end.

__________________
Murphy's law - "Anything that can go wrong will go wrong".
-469 ,Butler 310+ Eheads, Hurricane intake portmatched by butler, Butler roller 230/236 @0.50 112 LSA, Johnson lifters, pypes 2 1/2" exhaust, 3.42 yukon duragrip lsd, holley sniper efi, hyperfuel efi tank +++