Thread: The 400 let loose again; this is getting old
View Single Post
  #4  
Old 05-16-2016, 07:57 AM
Half-Inch Stud's Avatar
Half-Inch Stud Half-Inch Stud is offline
Ultimate Warrior
  
Join Date: Jul 2000
Location: BlueBell, PA or AL U.S.A.
Posts: 18,479
Default
Yea i got a thought on oil pressure: did the oil gauge reading chatter at any RPM?

i lspun a rod bearing due to low of an oil level. My remedy was a deep sump pan, a crank scraper & lots of oil.

Reply With QuoteReply With Quote