72 LeMans Core Support Mounts Rusted Out
I started working on the long overdue 72 LeMans project and pulled off the core support to try to repair where the core support bushings rotted out. If I sandwich weld both sides of the core support plates, would I need to trim the new bushings or use thinner washers to compensate for the new metal? It seems that finding a 72 core support is a difficult and pricey endeavor though 1970 ones (particularly Chevelle) are quite common and cheap. 
__________________
 Johnny US Army Retired
1978 T/A 463 Pontiac, KRE 74cc 292CFM D-ports, Lunati VooDoo, V-max lifters, TKII, ATM 850 E85 carb, TCI TH-350 race tranny, 3600 converter 3.73 12 bolt 11.63@116.68mph
1981 T/A 4-speed 406 Pontiac, Merrick ported 6X heads, Comp 270S cam, Crosswind intake 750 Street Demon, 3.42 30 spline Eaton posi street car.
1980 Formula 350 Pontiac back burner project
1972 LeMans 350 Pontiac
|