Quote:
Originally Posted by Half-Inch Stud
Ahem, the torqAmp unit looks similar to my build, except the electrical box next to it is waaay bigger. And Mine is 2-Stage with total weight at 10 Lb.
Have that nice a day
for TV; I saw about 60F rise for 3.3 psi
|
Typical Vortech type Supercharger with an ambient inlet temp of 80 degrees will raise the temp to 125-130 degrees at 7 psi of boost pressure. The bearings and gears in the Vortech supercharger are also cooled by engine oil. So about 45 degrees rise for that unit with a 71% efficient Compressor Wheel.
A unit with a less efficient wheel will have a higher temperature rise.
What wheel did you use?
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught
Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
|