Comp uses different vendors so the seat height probably depends who they sourced them from.
To accurately measure seat height you’d need a mic with a ball on one end that matched the end of the pushrod you’re using.
__________________
68 GTO,3860#
Stock Original 400/M-20 Muncie,3.55’s
13.86 @ 100
Old combo:
462 10.75 CR,,SD 330CFM Round Port E's,Old Faithful cam,Jim Hand Continental,3.42's.
1968 Pontiac GTO : 11.114 @ 120.130 MPH
New combo:
517 MR-1,10.8 CR,SD 350CFM E's,QFT 950/Northwind,246/252 HR,9.5” 4000 stall,3.42's
636HP/654TQ
1.452 10.603 @ 125.09
http://www.dragtimes.com/Pontiac-GTO...lip-31594.html
|