View Single Post
  #1  
Old 12-01-2009, 06:43 PM
Tom Vaught's Avatar
Tom Vaught Tom Vaught is offline
Boost Engineer
 
Join Date: Dec 2001
Location: The United States of America
Posts: 31,303
Default Know your competition

Hopefully this will become a sticky. The intent is to have links to articles showing dyno tests etc "for the other guys" to get a feel for the Head Flow, Compression Ratio, Engine CID, Camshaft Specs, Timing, and Boost (PSI) and how they relate to the Horsepower and Torque of the engine.

Article #1: Chevy High Performance magazine documents the installation of a Vortech V-7 YSi-Trim supercharger on a Pace Performance ZZ502 short block engine. The engine made a maximum of 1115 HP on the dyno with 14.2 PSI from the supercharger.

http://www.chevyhiperformance.com/te...ade/index.html


Tom Vaught

__________________
"Engineers do stuff for reasons" Tom Vaught

Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.