Engine X-member and steering
Finished off the cuts in the sub frame and added 1 5/8" and 1 1/4" 4130 tubes back in. Started to mock up the rack and pinion. As soon as we finalize the rack's position we are going to add 3/4" tubular gussets from the plate to the larger tube. We're going to need to put the mock up engine back in to determine if the balancer with the trigger wheel on it are going to be an interference issue with the rack. More to come...
__________________
1964 GTO
501, Edelbrock Heads NA, 3460 lbs.
9.76 @ 137mph
1971 Trans Am Lucy Blue, 11.56 @ 115
1966 LeMans. 462, SD prepped Kaufman D ports. 11.90 @ 112
1976 Trans Am twin turbo 462, SD Edelbrock heads 8.50@159
2009 G8 GT
|