I've not seen oversized throttle plates. Ames sells standard end carb throttle plates for $29 a pair. For $58, you've got bot end carbs covered.
You cannot use thin plates because of the slot width in the end carb throttle shafts.
Remember, all that matters is the perimeter of the plate. Pits in the surface have no effect on performance. A little careful fitting and DAG213, and you'll be set!
Here are a few of the 21 carbs I did last week.
__________________
BONESTOCK GOATS
'64 GTO Tripower Hardtop (Wife's Car)
'64 GTO Tripower Post Coupe (My Car)
'99 Bonneville SE Sedan
|