I have a question about the PCV system on the Olds 403 configuration that I am running.
The previous owner put on a Holley 750 and it looks like the PVC system is disabled and causing some venting issues.
I currently have a chrome oil breather cap on the passenger valve cover and the twist on oil filler cap in a separate hole.
On the driver side I have a breather with a tube / hose hole with the tube / hose missing. On the air cleaner housing mounted to the shaker scoop is a rubber hose fitting going into the air cleaner housing - hose from the housing to the valve cover (if that is where it goes) is missing. I purchased a new air cleaner which is just a 14" x 3" tall paper air cleaner.
What am I missing or could someone send me photos of what it should look like.
Thanks guys
|