Quote:
Originally Posted by kyle_blake
Thank you GTO hurst, That makes sense, like how the hell would you mount something that heavy on the inside with out the threaded stud's going threw the firewall with nut's on the other side.
Hopefully they are all super easy to access and don't have any BS bolts/nuts near the blower motor mounting locations.
I'll have to use hockey tape on the socket to take nuts off without removing paint. When it goes back on I'll use touch up paint on surface around nut against firewall location. It's either that or blast the nuts and Black paint colour.
Phew, ok.. This is doable , I'll try and take some pics and help future forum members when they need to do this job.
THANK YOU!
|
That would be a great ides, lots of pics with descriptions would help alot, Thanks.