UPDATE
Hi Guys,
Non A/C Car here
1 seat removed
2 Remove hoses.
3 You can..if u want suck some antifreeze out of unit, put some stuff in the pipes so when you pull it out it doesn't leak
4 pull glove box box and lid out ( screws and lift plastic parts off lid so you can remove metal cords
5 undo bracket in middle
6 undo electrical connection on top
7 remove 4 medal nuts from firewall. No issue with fender or any of that bs
8 pull tab metal tab off near gas pedal that activates one of the vents
9 - pull medal tab off near glove box
10 - pull medal tab off near middle of unit
11 - Wiggle out the whole being aware of how it fits
I decided to not go with Spectre aluminium hc, returned it. I went to local shop they wanted $250 so I decided to wait a bit and shop around.
Now I'm shopping in Canada. I'll try that Richmond manufacturing and amazon next.
Ames if I have to pay brokerage and conversion.
__________________
69 Gto, 390 posi gears,th400 w/jim hand converter/406 pontiac/#64 HEADS/ 10:1 compression/ 190 PSI with/ TRW 160 thou domes / hooker headers 1 7/8, PRW 1.5 rockers, 405 Crower Springs, Holley 750 vac with proform upgrade, Performer RPM on points / 284 H Single Pattern Crane
Last edited by kyle_blake; 01-13-2020 at 07:15 PM.
|