Quote:
Originally Posted by weranc55
So you think 71 was a one year only setup on the drivers side?
|
The stationary 80 amp front mounting plate along with the idler pulley was used on '71-76 F-body's, as well as '71 Pontiac A-bodys built up into mid April of '71. In mid April '71, 80 amp equipped '71 A-body's began to be assembled with the front alt mtg plate w the adjustment slot.
Minute detal wise, the alum pivot block changed part numbers, & at least two different design stamped steel pulleys were used as idler pulleys. the latter being able to have its small bearing removed & replaced.