Thread: 1991 FB engines
View Single Post
  #4  
Old 01-21-2014, 12:05 PM
Captainofiron's Avatar
Captainofiron Captainofiron is offline
Chief Ponti-yacker
 
Join Date: Apr 2007
Location: Austin, TX
Posts: 648
Default

Quote:
Originally Posted by Aus Goat View Post
QF 750 VAC 2 on a EB manifold ( air gap ) but the vac port at the back needed to get clearance so owe installed a 1/2 ' spacer . And then the issues start
is there another vacuum port to use?

maybe you can plug that back vac port and install a T-fitting in another vac port so you can then manifold it out?

__________________
www.fquick.com/Captainofiron

68 Firebird 400, YC 400, Hbeam rods, ported 670 heads (2.11i, 1.77e valves), 1.65 RRs, Torker 2 intake, Nodular Crank, Eaton Limited Slip, Richmond 3.55 gears, M-20 M4
97 Trans Am WS6, LT1, M6, FLP LTs, Cutouts, Flowmaster catback, Jet Airfoil, K&N air filter, MSD Opti and Coil
14 Fiat 500e 83kW motor, 24kWh lithium ion battery, +2 sized summer tires