Ugh, that does sound bad.
When you say the fluid looks low, you mean like not registering on the dipstick low? Foamy usually indicates air in the system.
Here is how I do mine.
Make sure the proper fluid level is met.
Remove cap
Start up engine
Turn wheel while running - hold at stop and rev to 2500. (careful, the cap is off) This this on one side then to the other.
Do this 3x
Center when done
Shut off engine
Recheck fluid.
__________________
.
Mark S
.
Who needs nice and pretty, when you can have mean and nasty?
KRE Aluminum headed 463CID 73 LeMans. Used to run 10.6x @ 124.55. 3700lbs
.
So much for 2020...shootin for 9s in 2021...and in 2022 apparently.....looks like 2023 as well.
>> My 73 Build thread
|