Quote:
Originally Posted by AG
If the person advising you about the set-up wants the pinion yoke to be within 1 degree of the trans (which assumes a 1 degree change under load) then your pinion should be 2.85 degrees up if your trans is 3.85 degrees down.
|
No one is really advising me. Im going off of whats out there on the web. I have all polyurethane bushings and poly tranny mount. Ive done the under the car camara and there seems to be no noticable movement.
I raised the trans up today 1/2" . Now the trans angle is -3.15 and shaft is -1.80 so that comes out to 1.35 . Rear yoke is -.55 drive shaft is 1.80 = 1.25 .So thats close to parallel as thats what i think the video was saying to go for right?