Quote:
Originally Posted by Formulabruce
What I have done is to solder the canister stand pipe end, then drill a tiny, very tiny hole in it. You cannot blow through this to any degree when its right.
|
Thanks Bruce, that’s a great idea!
__________________
-- Kevin
1971 Trans Am, White/Blue
455 YC Block with Edelbrock Performer RPM Aluminum Heads, 10-10.5 estimated CR, E-Performer Plus cam (soon to be 041 + Rhoads), Comp Cams 1.65:1 roller tip rockers, E-Performer Aluminum Intake (soon to be topped by a FiTech EFI), TRW forged pistons, Hedman Husler Headers, 3" dual exhaust with Flow Master mufflers.
|