View Single Post
  #1  
Old 03-25-2024, 06:09 PM
GTO-relic GTO-relic is offline
Senior Member
 
Join Date: May 2021
Posts: 157
Default RAM AIR V TUNNEL PORT COMP SOLID ROLLER CAM 279/284 dur, .673/.685 lift, 108LSA

COMP CAMS SOLID ROLLER
279/284 duration @ .050"
lift .673/.685 w/1.65 rockers
lift .612/.619 w/1.5 rockers
above figures with valve lash .028"/.030"
108 LSA, 102 ICL, 6 degrees advance ground in
will fit original Ram Air V tunnel port heads, McCarthy aluminum RA V heads, DCI Johnston RA V heads, Kaufman billet RA V heads
run for 30 minutes to set timing, carb
then replaced with smaller 250/270 duration solid flat tappet cam,
back in 1990.
this cam is not even fully broken in. like new.
in Comp box with cam card
$1200 cash pick up in person
will ship anywhere, with gifted paypal, postal money order
Attached Thumbnails
Click image for larger version

Name:	rv8.jpg
Views:	53
Size:	50.4 KB
ID:	631029   Click image for larger version

Name:	rv7.jpg
Views:	67
Size:	61.5 KB
ID:	631030   Click image for larger version

Name:	rv0.jpg
Views:	63
Size:	62.1 KB
ID:	631031   Click image for larger version

Name:	rv90.jpg
Views:	41
Size:	58.9 KB
ID:	631032   Click image for larger version

Name:	rv9.jpg
Views:	34
Size:	67.5 KB
ID:	631033  



Last edited by GTO-relic; 03-25-2024 at 06:18 PM.