Subscribing... my last build was supposed to have been torque plated, but I found out later it was not (Bill found this out when balancing a new rotating assembly for me). Since the bores were good, we left it alone, installed the new assembly and has been running like a champ ever since putting out ~600hp to the crank.
Sent from my SM-G965U using Tapatalk
__________________
68 Firebird-- Street/Strip - 400/461 Eagle Forged Bottom End & Ross Flat top pistons. KRE 325 CFM D port, Ultradyne 263/271 @.050, .4267 lift. Crower Solid roller lifters and 1.65 stainless rockers. Quickfuel 1000 on Torker2 intake and 2" open spacer. Hedman 1.75" headers. TH400 w/brake. Ford 9" w/3.80 gears & 28x9 Hoosier pro bracket drag radial. Best ET: 1.35 60ft, 6.29 @ 107.20 mph, 9.99 @132.33 mph. 3,300 race weight
|