Finished the sealing today ... think I will go back and do the seam on that window channel ... didn't do it today.
How about the drip rail channel? I can't tell what's going on there. I cleaned it down to bare metal with a wire brush on a drill, now it's primed ... I don't see evidence of an actual seam in there, but there has to be one right?
There was accumulated paint, vinyl top glue etc. in there but I didn't see a lot of sealant come out. Should I run a bead of sealant in the channel and smooth it down with a finger or something?
Anyone ever noticed that the drip rail is sort of screwed on? Mine appears to have been screwed on, then tack welded in place at the factory. From the way it cleaned up in the door seal area it almost looks like stainless steel.
|