Quote:
Originally Posted by AG
This. I also got the same driveshaft from Strange and I'll never have to be concerned about failure. You can look up a chart that shows the critical RPM for a given material, diameter and length to decide what you need.
|
I know the diameter and the length dropped the 80 percent critical rpm to just under 6800 rpm..but it can handle 1500hp if I remember.
__________________
466 Mike Voycey shortblock, 310cfm SD KRE heads, SD "OF 2.0 cam", torker 2
373 gears 3200 Continental Convertor
best et 10.679/127.5/1.533 60ft
308 gears best et 10.76/125.64/1.5471
Last edited by ta man; 01-13-2021 at 03:22 PM.
|