[Billy177]

1970 GTO PS/PB A/C

71' 455 +.030 zero decked
Nodular crank .010 M .020 R
Scat forged H-beam rods with pressed pins
TRW forged pistons
Sealed power 80lb oil pump with a stock baffled pan
Comp XE274H with an Edelbrock timing chain
Stock Edelbrock heads (87cc)
Harland Sharp 1.5 rockers
Performer RPM Gasket matched with a 1 inch open spacer on top
Holley 850DP fed by a Carter 120gph mechanical
Doug's Headers with dual 3 inch exhaust
Hays Flywheel with a 11 Inch ram power grip and Power Master Mini Starter
TKO600 (.64)
Shortened stock drive shaft
Ford 9 inch with 3.60's and a Detroit TruTrack
275/60/15 Radial T/A's on 15x8 Cragers

Engine was assembled by me when I was 18
In the pictures it had the crappy Edelbrock 750 and a performer intake