Weather you need a v belt or serpentine belt i perfer to use an old belt that is too long. I cut it square, then wrap it around the pulleys and mark the end at max length. Subtract 3/4"-1" and you've got your length. For me this works better cause the belt is sitting excatly how it should be in the pulleys.
__________________
1967 GTO, 432 (428+.030), 4-bolt mains, factory Nodular crank, scat rods, icon dished pistons, Lunati HR 243/251@.050, .618/.622 lift, Edelbrock 72cc round port heads, 10.5:1, offy 2-4 intake, Edelbrock 650cfm carbs, Super T10 trans (2.64 first), BOP 10 bolt w/ Eaton posi and 3.36 gears
|