I have a custom Comp Cams HR camshaft that I purchased several years ago from a forum member. I am almost leaning on running this cam on my build... Not sure what to expect with it.
These are the specs of the cam I have... not sure if I should sell it or run it... looking for opinions... I had to peace the specs together based on the comp grind numbers and info the seller provided to me...
Comp cam hydraulic roller.
Part# is 51-000-9 the grind# p 3315/3112
Valve lift Intake / Exhaust with 1.5: .510
Duration: I 281 /E 290
Lobe sep: 110
Valve timing @ .050
Intake Opens: 5 btdc Closes: 45 abdc
Exhaust Opens: 44 bbdc Closes: 4 atdc.
Lobe lift
Intake: .3400
Exhaust: .3400
Run it or sell it?
SPEED SAFE, NICK
__________________
"The grass is not greener on the other side, its just fertilized with different $h!t"
|