https://www.summitracing.com/parts/u...tiac/model/gto
I just got one of these. It bolts to the floor brace and tucks up so it doesn’t hang down. They make them for most popular models.
I had one of those Mike Caruso no drill loops but he quit making them. He had separate ones for T400’s and T350’s. That was a nice design that was made for the Pontiac crossmember. The RARE is on the left and the Caruso on the right. Never could get the RARE to fit right.
__________________
68 GTO,3860#
Stock Original 400/M-20 Muncie,3.55’s
13.86 @ 100
Old combo:
462 10.75 CR,,SD 330CFM Round Port E's,Old Faithful cam,Jim Hand Continental,3.42's.
1968 Pontiac GTO : 11.114 @ 120.130 MPH
New combo:
517 MR-1,10.8 CR,SD 350CFM E's,QFT 950/Northwind,246/252 HR,9.5” 4000 stall,3.42's
636HP/654TQ
1.452 10.603 @ 125.09
http://www.dragtimes.com/Pontiac-GTO...lip-31594.html