[Stan Weiss]

Originally Posted by RocktimusPryme

Ive wondered the same thing with the 3.08s. Would my second half of the track be a little better than my first?

If I were to have built the rear from scratch I would have bought 3.23s, but my core came with 3.08s. Didn't seem worth the money to jump one notch. Plus, I drove 75 mph down the highway too and from the track under 3000 RPM.

Another note, because I don't have a rev limiter, I shift fairly early to be safe. On the dyno we know my motor makes power up to 58-5900, but Ive been shifting at more like 5200. If I were to ring it all the way out, there might be a little more left still. Even these runs were a little harder on it, I ran a full MPH faster than I had before. Im also still a novice with real race tires. I have a total of maybe 7 passes with drag radials.

Ill do the 1/4 Injun Wars event @ Indy, other than that I will probably wait for a little cooler weather before I run again.

Also, Ive said it before, but another shout out to TSP converters. Mine is awesome.

You need to get a rev limiter. Based on your dyno sheet the min RPM I would shift at is 6200. Leaving a lot of et on the table.

Stan