[mysticmissle]

New Rare Parts Pitman Arm
1967-1968 Pontiac Firebird (See Extended Description Below For Full Vehicle Application/Fitment Information)
Pitman Arms Include (When Applicable) Castle nut, Cotter Pin & Zerk Fitting
Pivot End is grease-able
Rare Parts #20761 or RP20761

NOTE: Fits Vehicle Equipped With Manual Steering Only
NOTE: Fits Vehicles Originally Equipped With V8 Engine Only

FITS:
1967; Pontiac; Firebird V8; 6.6L; ; 400cid
1967; Pontiac; Firebird V8; 5.3L; ; 5343cc; 326cid
1967; Pontiac; Firebird V8; 6.6L; ; 6555cc; 400cid
1968; Pontiac; Firebird V8; 5.7L; ; 350cid
1968; Pontiac; Firebird V8; 6.6L; ; 400cid
1968; Pontiac; Firebird V8; 5.7L; ; 5733cc; 350cid
1968; Pontiac; Firebird V8; 6.6L; ; 6555cc; 400cid



Specs:

Stud Diameter Small End Of Taper 0.589
Sector Shaft Diameter 1.125
Sector Shaft Spline Large Inner Diameter 1.028
Length Center to Center 5.5
Key Way (Male or Female) Male
Off Set Down
# of Splines 32
Greaseable Yes
Hardware Content Included No
Arm Type Bent
Arm Fixture Stud
Arm Fixture Stud Thread/Hole Inside Diameter 1/2-20
Package Contents 1 Pitman Arm, 1 Dust Seal, 1 Castle Nut, 1 Cotter Pin, 1 Grease Fitting

never been mounted bought dont need $100 shipped. This is the curved arm for v8 cars with manual steering box.