Rocky I will clean it up later today and send you photos.
I will put some better photos on the forum too.
John we only have the one 48 head. I never knew any history from the head, we bought close to 20 years ago from a local guy when we went to look at his 76 Black 455 T/A. Looking at the head it was ran very little. There is no electrolysis on the head surface and the valve seats and valve guide seem new. I am curious what the head has for stock valve springs, and whether the springs were for a 744 cam or a 068, the spring coils looked a little bigger than a typical poncho head. I will clean the head up an check for more identifications.
Last edited by Jay S; 12-12-2020 at 08:55 AM.
Reason: Edit
|