Hey all, thinking of bottle feeding my car this summer.
Just want to install something cheap and easy.
I have a 455, stock crank, 2 bolt mains studded, h beams and Ross pistons. Block is filled to water pump holes, 310 cfm 85cc edelbrocks, 4500 Victor, & a 1050 dominator. Electronic ing, TH400 with brake, 4500 10" convertor, 9" with 3:90 and a 28x9 slick.
Car runs 10.86@123 weighs 3800 with driver.
Was thinking of a small kit with 50, 75 & 100hp jets a plate system with WOT switch
What's the rule of thumb with timing when spraying? Also how much up jetting, add more oxygen need more fuel right?
If I use a WOT switch would It be activated and on when I use the trans brake? Is a controller better? Want to keep it simple.
Also I see most basic kits don't come with a purge valve.
Thanks In Advance
Sent from my Pixel 3 XL using Tapatalk
__________________
Giving To Others!!!
V.P. Pioneer Valley GTO Association www.pvgto.com
67 Lemans 455 best et. 12.023@ 111 mph LVD 9/2008
68 GTO H.O. in progress?
