so listen, don't push the switch out off it's metal grounding. make sure you push the front of switch so it doesn't come out. then try insert the bulb at back.. trust me how i know, spark spark and 20 amp fuse went.
oh the optical wire, i followed to the end of it and it wasn't attached up to the cluster.
the weird thing is the cluster has every light hole filled, some mechanic must of just had an extra one day? I assume I just remove one of the normal light black plastic and put this end in there. I can't see it being a special hole on the circuit board? gonna try tomorrow. hope this helps someone.
just found this thread which i will review, looks like someone says where it is suppose to go!
http://forums.maxperformanceinc.com/...66#post5302466
__________________
69 Gto, 390 posi gears,th400 w/jim hand converter/406 pontiac/#64 HEADS/ 10:1 compression/ 190 PSI with/ TRW 160 thou domes / hooker headers 1 7/8, PRW 1.5 rockers, 405 Crower Springs, Holley 750 vac with proform upgrade, Performer RPM on points / 284 H Single Pattern Crane
Last edited by kyle_blake; 03-04-2020 at 03:49 AM.
|