[deric]

I must have let this go too long as I can't figure out how to modify my orginial post. I have 17x8 Troq-Thrusts with 4.5" backspacing and 0" offset front and rear. I have 245/45/17s in the front and 255/50/17 in the rear. To get the 255/50/17's to fit in the rear I narrowed the rear 1" on each side. The car in the pricture has the original rear springs installed. I want the front 1 to 2 inches lower, then I'll lower the rear end. The car has disks front and rear along with 2" dropped spindles and 1" dropped springs up front I think that the dropped springs are too stiff as it doesn't appear that the front dropped much at all and I don't like the way the wheeling tire fit in the wheel well.