I searched the forum and found some older threads on dielectric grease being used for wiring harnesses where they plug into the body. I have a 69 Grand Prix and the oil pressure gauge does not seem to work, so I am trying to figure out what is going on. Anyway, while investigating that (it does not move connected or not, so it seems to be grounded out) I took a look at the connections back from the connector. The bulkhead connectors have grease, but it is not like any dielectric grease I have used. The grease I have applied in the past is clear and not sticky at all, but this stuff is brown and very sticky.
So is this stuff good to go or should I clean it off and apply the clear stuff I have?
